OT FIT 18/220...240/450 CS PC SC

Product family benefits
  • Compatible with the most common leading-edge and trailing-edge phase dimmers
  • Flexible current setting (DIPswitch – 2 to 4 currents)
  • Flicker-free dimming
  • Higher quality of light thanks to < 5% output ripple current
  • Housing from 80% recycled plastic
Areas of application
  • Decorative illumination
  • Downlights, flat luminaires
  • Hospitality
  • Living areas
  • Museums, residential buildings
  • Offices
  • Shop lighting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection class I and II
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Permitted voltage range

Total harmonic distortion

< 20 %

Full load, 230V, 50 Hz

Power factor λ

0.92C...0.97

Full load at 230 V/Minimum load at 230 V

Efficiency in full-load

> 82 %

at 230 V, 50 Hz

Device power loss

4.0 W

Maximum

Protective conductor current

<0.7 mA

Inrush current

< 10 A

twidth = 100 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

33

Max. ECG no. on circuit breaker 10 A (C)

55

Max. ECG no. on circuit breaker 16 A (C)

88

Max. ECG no. on circuit breaker 16 A (B)

53

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

27…40 V

Maximum 60 V

U-OUT (working voltage)

60 V

Nominal output current

225 / 325 / 350 / 450 mA

±7.5%

Output current tolerance

±7.5 %

Output ripple current (100 Hz)

< 5 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

18 W

Partial load 6.1…18W

Maximum output power

18 W

Galvanic isolation primary/secondary

SELV

Default output current

450 mA

Current set

DipSwitch

Dimensions & weight

Product weight

77.70 g

Cable cross-section, input side

0.75…1.5 mm²

Flexible

Cable cross-section, output side

0.75…1.5 mm²

Flexible

Wire preparation length, input side

5…6 mm

Wire preparation length, output side

5…6 mm

Width

50.0 mm

Height

22.0 mm

Length

95.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

80 °C

Maximum at the Tc-point

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-20…80 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

30000 / 50000 h

At maximum Tc = 80°C / 10% failure rate / At maximum Tc = 70°C / 10% failure rate

Capabilities

Dimmable

Yes

Dimming interface

Phase Cut

Leading edge

Dimming range

5…100 %

Dimming method

Amplitude Modulation

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Screw terminal

Type of connection, output side

Screw terminal

Number of channels

1

Suitable for through-wiring

No

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

CE / CCC / ENEC / EAC / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Protection class

I,II

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

16-08-2023

Primary Article Identifier

4062172088701

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

11f5e87b-407e-45b2-8a99-08c2e4a81616

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172088701 UNV

Unpacked

1 95mm x 50mm x 22mm 78.00g 0.10dm³
4062172088718 VS

Shipping box

20 264mm x 202mm x 64mm 1555.00g 3.41dm³

Downloads

Information about Family

Constant Current SELV drivers with leading- or trailing-edge dimming.

The compatibility with the most common leading-edge and trailing-edge phase dimmers and the possibility of dimming from 5-100% marks one of the key characteristics. Others include a cable clamp for independent installations and DIP switsches for 4 output currents per wattage.
Product family features
  • Cable clamp housing for independent mounting
  • Dimmable on the leading edge and trailing edge
  • Housing for independent installation
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 7/220...240/180 CS PC
27…40 V 100 / 120 / 155 / 180 mA 130.0 mm 30.0 mm 22.2 mm
OT FIT 8/220...240/180 CS PC
27…40 V 100 / 120 / 155 / 180 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 8/220...240/180 CS PC SC
27…40 V 100 / 120 / 155 / 180 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 14/220...240/350 CS PC
27…40 V 200 / 250 / 300 / 350 mA 130.0 mm 30.0 mm 22.2 mm
OT FIT 18/220...240/450 CS PC
27…40 V 225 / 325 / 350 / 450 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 18/220...240/450 CS PC SC
27…40 V 225 / 325 / 350 / 450 mA 95.0 mm 50.0 mm 22.0 mm
OT FIT 30/220…240/700 CS PC
27…40 V 500 / 700 mA 95.0 mm 53.0 mm 30.0 mm
OT FIT 40/220...240/1A0 CS PC
27…40 V 800 / 900 / 950 / 1050 mA 108.0 mm 67.0 mm 22.0 mm
OT FIT 40/220...240/1A0 CS PC SC
27…40 V 800 / 900 / 950 / 1050 mA 108.0 mm 67.0 mm 22.0 mm