OTi DALI 75/220…240/700 D NFC TW L
Product family benefits
- Control of standard white or Tunable White light acc. DALI device type 8 (DT8)*
- TouchDIM Tunable White integrated for use without additional LMS
- Fully programmable via T4T software (NFC, DALI Interface)
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- High-quality dimming of 1…100 % (amplitude and/or PWM selectable by software)
- High quality of light thanks to <1% output ripple current
- Very high efficiency
- Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
- Easy to use in corridors and restrooms because of three-level Corridor function
- Touch DIM application: easy to control via pushbutton or sensor
- Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
- Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
- Feedback of power consumption and operating hours (Fit for SMART GRID)
- Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
- Luminaire information for easy maintenance
Areas of application
- For Tunable White as well as for 2-channel use (e.g. direct/indirect lighting)
- Linear lighting for office, education, industry, storage areas and retail
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for installation in emergency lighting systems according to EN 60598-2-22
- Suitable for luminaires of protection class I
- Perfect system match with PrevaLED Linear Tunable White
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Current set
DALI / NFC / Programmable
Total harmonic distortion
< 10 %
Power factor λ
0.59C...0.98
Efficiency in full-load
91 %
Device power loss
6.0 W
Inrush current
23 A
Max. ECG no. on circuit breaker 10 A (B)
13
Max. ECG no. on circuit breaker 16 A (B)
19
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
50…240 V
U-OUT (working voltage)
< 250 V
Nominal output current
150…700 mA
Default output current
150 mA
Output current tolerance
±3 %
Output ripple current (100 Hz)
< 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
8.1…75 W
Maximum output power
75 W
Galvanic isolation
Non isolated
Galvanic isolation primary/secondary
-
Power loss in stand-by mode
<0.2 W
Dimensions & weight
Mounting hole spacing, length
350.0 mm
Product weight
260.00 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Wire preparation length, output side
8.0…9.0 mm
Height
21.0 mm
Width
30.0 mm
Length
360.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
Additional product data
Encapsulated
No
Capabilities
Programming interface
DALI, NFC
Dimmable
Yes
Dimming interface
DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range
1…100 %
Dimming method
Full analogue dimming / AM/PWM selectable
Constant lumen function
Programmable
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Suitable for emergency lighting
Yes
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
DALI-2 Diagnostic Data
No
Control interface
DALI
Number of channels
2
DALI-2 Energy Data
No
Programming
Programming device
DALI magic / NFC Scanner
Tuner4TRONIC
Yes
Tuner4TRONIC Field App
No
Box programming
Yes
Programmable features
Operating Current
Yes
Lamp Operating Time
Yes
Driver Guard
Yes
DALI Settings
Yes
Emergency Mode
Yes
DALI-2 Luminaire Data
No
Soft Switch Off
Yes
Dim to Dark
Yes
TouchDIM + Sensor
Yes
Corridor Functionality
Yes
Tunable White CCT
Yes
Tunable White High precision
Yes
Certificates & standards
Approval marks – approval
CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
07-07-2023
Primary Article Identifier
4052899990326 | 4050732460562
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
5950e01c-db9f-4acb-91ba-c878dcf5f020 | 14285238-1377-40be-b396-66efb470b658
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899990326 |
UNV
| 1 | 360mm x 30mm x 21mm | 260.00g | 0.23dm³ |
| 4052899990333 |
VS
| 20 | 385mm x 160mm x 100mm | 5374.00g | 6.16dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Peace of mind – easy, multi-usable, affordable
Selectable AM or AM/PWM dimming and 3 selectable lighting quality levels are provided by Tuner4TRONIC for this device. A TW TouchDIM is also integrated which allows dimming and changing of color temperature without LMS. The driver also combines DT8 and 2xDT6 in one device.
Selectable AM or AM/PWM dimming and 3 selectable lighting quality levels are provided by Tuner4TRONIC for this device. A TW TouchDIM is also integrated which allows dimming and changing of color temperature without LMS. The driver also combines DT8 and 2xDT6 in one device.
Product family features
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Versatile DALI window driver up to 75 W due to flexible output characteristic
- Supply voltage: 220…240 V
- Usable as DT6 (2-channel) or DT8 (Tunable White) driver*
- Available with output current range: up to 700 mA
- Constant Lumen Output (CLO)
- Integrated customizable thermal management (Driver Guard)
- Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 35/220…240/400 D NFC TW L
|
45…240 V | 75…400 mA | 360.0 mm | 30.0 mm | 21.0 mm | ||
|
|
OTi DALI 75/220…240/700 D NFC TW L
|
50…240 V | 150…700 mA | 360.0 mm | 30.0 mm | 21.0 mm |