OTi DALI 40/220...240/1A0 NFC S
Product family benefits
- Versatile DALI window driver due to flexible output characteristic
- Locking and unlocking of luminaire/driver data
- Easy and fast output current setting via NFC
- Very high efficiency
- High-quality dimming of 1…100 % by amplitude dimming
- DALI-2 certified incl. Parts 251, 252, 253
Areas of application
- Suitable for downlights, spotlights and LED panels
- Suitable for use in luminaires with flexible current setting
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for indoor SELV installations
- Suitable for luminaires of protection classes I and II
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
0…60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Total harmonic distortion
< 10 %
Power factor λ
0.85C…0.98
Efficiency in full-load
91 %
Inrush current
< 20 A
Max. ECG no. on circuit breaker 10 A (B)
20
Max. ECG no. on circuit breaker 16 A (B)
30
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
20…50 V
U-OUT (working voltage)
60 V
Nominal output current
500…1050 mA
Default output current
700 mA
Output current tolerance
±5 %
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
40 W
Maximum output power
40 W
Power loss in stand-by mode
<0.15 W
Current set
DALI / NFC
Networked standby power
≤0.18 W
Galvanic isolation DALI/output
SELV
Galvanic isolation primary/secondary
SELV
Galvanic isolation DALI/mains
Basic
Dimensions & weight
Mounting hole spacing, length
88.0 mm
Mounting hole spacing, width
34.0 mm
Product weight
120.00 g
Cable cross-section, input side
0.2…1.5 mm²
Cable cross-section, output side
0.2…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Wire preparation length, output side
8.0…9.0 mm
Length
97.0 mm
Height
29.5 mm
Width
43.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-20…+50 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-25…85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
Capabilities
Dimmable
Yes
Dimming interface
DALI-2
Dimming range
1…100 %
Dimming method
Amplitude Modulation
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, input side
Push terminal
Type of connection, output side
Push terminal
Control interface
DALI
Programming interface
DALI, NFC
Suitable for emergency lighting
Yes
Suitable for through-wiring
No
DALI-2 Diagnostic Data
Yes
DALI-2 Energy Data
Yes
Number of channels
1
Constant lumen function
Programmable
Programming
Tuner4TRONIC
Yes
Programming device
DALI / NFC
Box programming
Yes
Tuner4TRONIC Field App
Yes
Programmable features
OEM Key
No
Operating Current
Yes
Constant Lumen
Yes
Lamp Operating Time
Yes
Driver Guard
Yes
DALI Settings
Yes
Emergency Mode
Yes
DALI-2 Luminaire Data
Yes
Configuration Lock
Yes
Soft Switch Off
Yes
Dim to Dark
Yes
TouchDIM + Sensor
No
Corridor Functionality
No
Certificates & standards
Approval marks – approval
CE / EL / DALI-2 / EAC
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-04-2023
Primary Article Identifier
4062172110105
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
a38a5978-c182-4edb-aec5-4e0524af57e6
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172110105 |
UNV
| 1 | 97mm x 43mm x 30mm | 2400.00g | 0.12dm³ |
| 4062172110112 |
VS
| 20 | 208mm x 158mm x 107mm | 2515.00g | 3.52dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Miniaturization – full DALI functionality – ready for IoT
This device has a DALI 2 interface and is fully digitally programmable by NFC and DALI with integrated luminaire info and data monitoring DiiA -251, -252, -253. It is also available as an independent version with cable clamps, screw terminals on the primary side and through-looping.
This device has a DALI 2 interface and is fully digitally programmable by NFC and DALI with integrated luminaire info and data monitoring DiiA -251, -252, -253. It is also available as an independent version with cable clamps, screw terminals on the primary side and through-looping.
Product family features
- Supply voltage: 220…240 V
- Line frequency: 0 Hz, 50…60 Hz
- Line voltage: 198…264 V
- According to EN 61347-1, 61347-2-13, 62384
- RI suppression: to EN 55015/CISPR 15
- Immunity according to EN 61547
- Type of protection: IP20
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 10/220…240/700 NFC
|
2.5…45 V | 150…700 mA | 124.0 mm | 31.0 mm | 21.0 mm | ||
|
OTi DALI 20/220...240/500 NFC S
|
20…50 V | 200…500 mA | 97.0 mm | 43.0 mm | 29.5 mm | ||
|
OTi DALI 30/220…240/700 NFC S
|
20…50 V | 350…700 mA | 97.0 mm | 43.0 mm | 29.5 mm | ||
|
|
OTi DALI 40/220...240/1A0 NFC S
|
20…50 V | 500…1050 mA | 97.0 mm | 43.0 mm | 29.5 mm |