OT FIT 40/220…240/1A0 LT2 LP

Product family benefits
  • Versatile scope of application due to output power range of up to 40 W
  • Fulfill safety requirement due to overload, overtemperature protection
  • High efficiency
  • Higher quality of light thanks to < 5% output ripple current
Areas of application
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Luminaires with flexible current setting (LEDset2)
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Independent mounting via Cable Clamp Kit possible
German innovation awards 2019 winner 540301_SELV, short circuit proof

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Total harmonic distortion

< 15 %

Power factor λ

0.98

Efficiency in full-load

87 %

at 230 V, 50 Hz

Device power loss

6.0 W

Inrush current

17 A

twidth = 225 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

19

Max. ECG no. on circuit breaker 16 A (B)

30

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

L+N / PE of basic isolated LED module

Surge capability (L-N)

1 kV

Nominal output voltage

15…50 V

U-OUT (working voltage)

60 V

Nominal output current

500…1050 mA

Output current LEDset open

Not allowed

Output current LEDset shorted

1050 mA

Output current tolerance

±5 %

Output ripple current (100 Hz)

< 5 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

13…40 W

Maximum output power

40 W

Galvanic isolation

SELV

Current set

LEDset2

Galvanic isolation primary/secondary

SELV

Dimensions & weight

Mounting hole spacing, length

94.0 mm

Mounting hole spacing, width

58.0 mm

Product weight

135.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

9.0…10.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

103.0 mm

Width

67.0 mm

Height

22.5 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+45 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

Tc = 75°C, 0.2% / 1,000 h failure rate / Tc = 65°C, 0.1% / 1,000 h failure rate

Additional product data

Predecessor EAN

4052899166318

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Type of connection, output side

Push terminal

Number of channels

1

Suitable for emergency lighting

Yes

Suitable for through-wiring

Yes

Programming

Programming device

LEDset

Certificates & standards

Approval marks – approval

CE / UKCA / ENEC / CCC / EL / RCM / BIS / EAC

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to EN 55015

Type of protection

IP20

Protection class

II

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

26-05-2023

Primary Article Identifier

4052899490734

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

5c5c1e01-8518-4cb8-bd43-a31141b276b3

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899490734 UNV

Unpacked

1
4052899490741 VS

Shipping box

20 348mm x 218mm x 67mm 2862.00g 5.08dm³

Downloads

Accessories optional

Information about Family

Compact and extra flat.

This extra flat LED driver offers flexibility at choosing compatible LED modules due to the very wide operating window. Some other highlights include the capability for DC-input, the suitability for emergency installations and the optional cable clamp that allows independent installations and trough-looping.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 15/220…240/500 LT2 LP
15…50 V 150…500 mA 103.0 mm 67.0 mm 22.5 mm
OT FIT 25/220…240/700 LT2 LP
15…50 V 300…700 mA 103.0 mm 67.0 mm 22.5 mm
OT FIT 40/220…240/1A0 LT2 LP
15…50 V 500…1050 mA 103.0 mm 67.0 mm 22.5 mm