OT FIT 150/220…240/1A0 D NFC IND L

Product family benefits
  • Flexible and future-proof current setting via NFC and LT2
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • Wide operating temperature range: -40…+65 °C
  • High quality of light thanks to <1% output ripple current
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Very high efficiency (up to 96%)
  • Integrated inrush current limiter
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting solutions for industry, storage areas and retail applications
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for installation in emergency lighting systems according to EN 60598-2-22
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

LEDset / NFC

Power factor λ

0.85C…0.99

Efficiency in full-load

95.5 %

at 230 V, 50 Hz

Device power loss

11 W

Inrush current

5 A

Max. ECG no. on circuit breaker 10 A (B)

14

Max. ECG no. on circuit breaker 10 A (C)

-

Max. ECG no. on circuit breaker 16 A (B)

22

Max. ECG no. on circuit breaker 16 A (C)

-

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

4 kV

Surge capability (L-N)

4 kV

Nominal output voltage

64…300 V

Nominal output current

250…1000 mA

Default output current

125 mA

LEDset deactivated

Output ripple current (100 Hz)

< 1 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

43…150 W

Maximum output power

150 W

Galvanic isolation

Non isolated

Output current LEDset shorted

250 mA

Output current LEDset open

125 mA

Output current tolerance

±3 %

Total harmonic distortion

7 %

U-OUT (working voltage)

< 340 V

Dimensions & weight

Mounting hole spacing, length

350.0 mm

Product weight

260.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

360.0 mm

Height

21.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-40…+70 °C

Maximum temperature at tc test point

85 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 85°C / 10% failure rate / At Tcase = 75°C at Tc point / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

5.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Constant lumen function

Programmable

Suitable for emergency lighting

Yes

Number of channels

1

Programming

Tuner4TRONIC Field App

Yes

Box programming

Yes

Tuner4TRONIC

Yes

Programming device

NFC / LEDset

Certificates & standards

Approval marks – approval

CE / EL / VDE-ENEC / EAC / CCC / BIS / RCM

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

28-04-2023

Primary Article Identifier

4052899990142

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

c1eeaa88-ec2e-4643-8df9-451d68f91219

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899990142 UNV

Unpacked

1 360mm x 30mm x 21mm 260.00g 0.23dm³
4062172192675 VS

Shipping box

20 385mm x 160mm x 100mm 5374.00g 6.16dm³

Downloads

Accessories optional

Information about Family

Peace of mind – robust, lasting, efficient.

An integrated CLO contributes to maximizing the energy efficiency and very low LF and HF ripple help avoiding machine disturbances. CLO and currents are programmable by NFC and LT2 and the device also features an integrated inrush current limiter.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 75/220...240/550 D NFC IND L
64…300 V 125…550 mA 360.0 mm 30.0 mm 21.0 mm
OT FIT 100/220…240/700 D NFC IND L
64…300 V 200…700 mA 360.0 mm 30.0 mm 21.0 mm
OT FIT 150/220…240/1A0 D NFC IND L
64…300 V 250…1000 mA 360.0 mm 30.0 mm 21.0 mm
OT FIT 300/220...240/1A6 D NFC IND L
60…300 V 250...1550 mA 360.0 mm 46.0 mm 28.0 mm