OT FIT 35/220…240/400 D LT2 UF L
Product family benefits
- Ultra-flat housing (11 mm height) for innovative luminaire designs and applications
- Flexible and future-proof current setting via NFC and LT2
- Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
- Higher quality of light thanks to < 1% output ripple current
- Very high efficiency
- Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
- Linear lighting for office, education, industry, storage areas and retail
- Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
0/50/60 Hz
Input voltage AC
198…264 V
Input voltage DC
176…276 V
Current set
LEDset2 / NFC
Power factor λ
0.37C...0.96
Efficiency in full-load
93 %
Device power loss
4.0 W
Inrush current
10 A
Max. ECG no. on circuit breaker 10 A (B)
18
Max. ECG no. on circuit breaker 10 A (C)
-
Max. ECG no. on circuit breaker 16 A (B)
30
Max. ECG no. on circuit breaker 16 A (C)
-
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
54…240 V
Nominal output current
75…400 mA
Output current LEDset open
35 mA
Output current LEDset shorted
75 mA
Default output current
35 mA
Output ripple current (100 Hz)
< 1 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
4…38 W
Maximum output power
38 W
Galvanic isolation
Non isolated
Total harmonic distortion
< 10 %
Output current tolerance
±5 %
Galvanic isolation primary/secondary
-
U-OUT (working voltage)
< 250 V
Dimensions & weight
Mounting hole spacing, length
350.0 mm
Product weight
180.00 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Width
30.0 mm
Length
360.0 mm
Wire preparation length, output side
8.0…9.0 mm
Height
11.0 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+60 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-40…+85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
100000 / 50000 h
ECG ambient temperature (ta) |
50 °C |
|---|---|
Temperature at the measuring point tc (°C) |
75 °C |
ECG lifespan (h) |
50000 h |
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Suitable for emergency lighting
Yes
Number of channels
1
Programming
Programming device
NFC
Tuner4TRONIC Field App
Yes
Certificates & standards
Approval marks – approval
EL / VDE-ENEC / EAC / CCC / BIS / RCM / CE / VDE-EMC
Standards
Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4052899590960
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1303dfab-3c18-4421-9baf-b59107acae8e
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899590960 |
UNV
| 1 | |||
| 4052899590977 |
VS
| 20 | 385mm x 160mm x 66mm | 3717.00g | 4.07dm³ |
Downloads
Data sheets
Accessories optional
Information about Family
Cutting edge design - total design freedom.
High efficiency of up to 93% and wide operating windows of up to 700mA pose the highlights of this LED Driver. The current is programmable by NFC and a low ripple contributes to the lighting quality. A height of only 11mm makes this device suitable for cutting edge luminaire design.
High efficiency of up to 93% and wide operating windows of up to 700mA pose the highlights of this LED Driver. The current is programmable by NFC and a low ripple contributes to the lighting quality. A height of only 11mm makes this device suitable for cutting edge luminaire design.
Product family features
- Line frequency: 0 Hz | 50 Hz | 60 Hz
- Versatile window driver up to 75 W due to flexible output characteristic
- Supply voltage: 220…240 V
- Available with output current range: up to 700 mA
- Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 35/220…240/400 D LT2 UF L
|
54…240 V | 75…400 mA | 360.0 mm | 30.0 mm | 11.0 mm | ||
|
OT FIT 75/220…240/700 D LT2 UF L
|
54…240 V | 150…700 mA | 360.0 mm | 30.0 mm | 11.0 mm |