OT FIT 75/220-240/350 D CS L

Product family benefits
  • Versatile scope of application due to output power range of up to 65 W
  • Safety requirement due to overload, overtemperature, short-circuit protection
  • High efficiency
  • User flexibility with four different output currents from one driver
Areas of application
  • Linear and area lighting
  • Office, industrial and shop lighting
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Current set

DipSwitch

Power factor λ

0.98

Efficiency in full-load

93 %

at 230 V, 50 Hz

Device power loss

6.0 W

Inrush current

< 40 A

twidth = 220 µs (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

8

Max. ECG no. on circuit breaker 10 A (C)

13

Max. ECG no. on circuit breaker 16 A (B)

13

Max. ECG no. on circuit breaker 16 A (C)

22

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

70…220 V

At 200/250 mA output current

Nominal output current

200 / 250 / 300 / 350 mA

Output ripple current (100 Hz)

< 4 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

16…77 W

Maximum output power

77 W

Default output current

350 mA

U-OUT (working voltage)

< 250 V

Total harmonic distortion

< 10 %

Dimensions & weight

Mounting hole spacing, length

200.0 mm

Product weight

140.00 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid / Flexible

Cable cross-section, output side

0.5…1.5 / 0.75…1.5 mm²

Solid / Flexible

Wire preparation length, input side

8.0…9.0 mm

Length

210.0 mm

Wire preparation length, output side

8.0…9.0 mm

Height

21.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…80 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 75°C / 10% failure rate

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Number of channels

1

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

CE / ENEC 05 / EAC / CCC / BIS / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

21-07-2023

Primary Article Identifier

4062172006323

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

267d6688-fe0a-4b08-92aa-47525fd35f99

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172006323 UNV

Unpacked

1 210mm x 30mm x 21mm 140.00g 0.13dm³
4062172006330 VS

Shipping box

20 234mm x 161mm x 101mm 2965.00g 3.81dm³

Downloads

Information about Family

Optimized price/feature ratio – good lighting quality & feature set for budget pricing

This linear LED driver has a small housing of just 210 mm, a low ripple of ≤ 4% and a high efficiency of up to 90%. 4 currents can be set via DipSwitch and the driver comes with a long lifetime and guarantee.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 35/220...240/350 D CS L
40…160 / 40…115 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 65/220-240/350 D CS L
70…220 / 70…190 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
OT FIT 75/220-240/350 D CS L
70…220 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm