OT FIT 35/220...240/350 D CS L
Product family benefits
- Versatile scope of application due to output power range of up to 65 W
- Safety requirement due to overload, overtemperature, short-circuit protection
- High efficiency
- User flexibility with four different output currents from one driver
Areas of application
- Linear and area lighting
- Office, industrial and shop lighting
- Suitable for luminaires of protection class I
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
220…240 V
Current set
DipSwitch
Power factor λ
0.98
Efficiency in full-load
91 %
Device power loss
4.0 W
Inrush current
30 A
Max. ECG no. on circuit breaker 10 A (B)
12
Max. ECG no. on circuit breaker 10 A (C)
20
Max. ECG no. on circuit breaker 16 A (B)
19
Max. ECG no. on circuit breaker 16 A (C)
32
Surge capability (L/N-Ground)
2 kV
Surge capability (L-N)
1 kV
Nominal output voltage
40…160 / 40…115 V
Nominal output current
200 / 250 / 300 / 350 mA
Output ripple current (100 Hz)
< 4 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
8…40.3 W
Maximum output power
40.3 W
U-OUT (working voltage)
< 250 V
Total harmonic distortion
< 10 %
Default output current
350 mA
Dimensions & weight
Mounting hole spacing, length
200.0 mm
Product weight
125.00 g
Cable cross-section, input side
0.5…1.5 / 0.75…1.5 mm²
Cable cross-section, output side
0.5…1.5 / 0.75…1.5 mm²
Wire preparation length, input side
8.5…9.5 mm
Height
21.0 mm
Width
30.0 mm
Length
210.0 mm
Wire preparation length, output side
8.5…9.5 mm
Colors & materials
Casing material
Metal
Temperatures & operating conditions
Ambient temperature range
-25…+50 °C
Maximum temperature at tc test point
75 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-25…80 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
50000 / 100000 h
Capabilities
Dimmable
No
Overheating protection
Automatic reversible
Overload protection
Automatic reversible
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I
Number of channels
1
Programming
Programming device
DIPswitch
Certificates & standards
Approval marks – approval
CE / ENEC 05 / EAC / CCC / BIS / RCM
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4052899531437
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
61485c6a-f241-4036-ad91-92b3fa8b2d6a
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899531437 |
UNV
| 1 | 210mm x 30mm x 21mm | 125.00g | 0.13dm³ |
| 4052899531444 |
VS
| 20 | 234mm x 161mm x 101mm | 2665.00g | 3.81dm³ |
Downloads
Data sheets
Information about Family
Optimized price/feature ratio – good lighting quality & feature set for budget pricing
This linear LED driver has a small housing of just 210 mm, a low ripple of ≤ 4% and a high efficiency of up to 90%. 4 currents can be set via DipSwitch and the driver comes with a long lifetime and guarantee.
This linear LED driver has a small housing of just 210 mm, a low ripple of ≤ 4% and a high efficiency of up to 90%. 4 currents can be set via DipSwitch and the driver comes with a long lifetime and guarantee.
Product family features
- Supply voltage: 220…240 V
- Line frequency: 50 Hz | 60 Hz
- Line voltage: 198…264 V
- Safety and performance according to IEC 61347-1, IEC 61347-2-13, IEC 62384
- RI suppression according to CISPR 15
- Line harmonics according to IEC 61000-3-2
- Immunity according to IEC 61547
- Lifetime: up to 100,000 h (temperature at Tc = -10 °C, max. 10 % failure rate)
- Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 35/220...240/350 D CS L
|
40…160 / 40…115 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
OT FIT 65/220-240/350 D CS L
|
70…220 / 70…190 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm | ||
|
OT FIT 75/220-240/350 D CS L
|
70…220 V | 200 / 250 / 300 / 350 mA | 210.0 mm | 30.0 mm | 21.0 mm |