OT FIT 30/220-240/700 CS S MINI

Product family benefits
  • Small housing for flexible luminaire designs
  • Higher quality of light thanks to < 3% output ripple current
  • Operating temperature: up to 60 °C
  • User flexibility with four different output currents from one driver
  • Flexible current selection via DIP switch
  • Reversible overtemperature, overload, short-circuit and open-circuit protection
  • High efficiency (up to 90%)
Areas of application
  • Extra small design for downlights, spotlights and other indoor luminaries
  • Suitable for luminaires of protection classes I and II
  • Suitable for indoor SELV installations
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Safety voltage range

Total harmonic distortion

< 10 %

At full load, 230 V, 50 Hz / see graphs

Power factor λ

0.91C…0.95

Efficiency in full-load

89 %

at 230 V, 50 Hz

Device power loss

3.6 W

At 230 V, Input power 33 W max.

Inrush current

13.4 A

Max. ECG no. on circuit breaker 10 A (B)

16

Max. ECG no. on circuit breaker 10 A (C)

26

Max. ECG no. on circuit breaker 16 A (C)

43

Max. ECG no. on circuit breaker 16 A (B)

26

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

30…42 V

U-OUT (working voltage)

60 V

Nominal output current

550/600/650/700 mA

±7.5%

Output current tolerance

±7.5 %

Default output current

700 mA

Output ripple current (100 Hz)

< 3 %

Ripple average at 100 Hz

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

16.5…29 W

Maximum output power

29 W

Galvanic isolation primary/secondary

SELV

Current set

DipSwitch

Galvanic isolation

SELV

Dimensions & weight

Product weight

90.20 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Cable cross-section, output side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Wire preparation length, input side

7…8 mm

Wire preparation length, output side

7…8 mm

Length

87.0 mm

Height

22.0 mm

Width

35.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+60 °C

Maximum temperature at tc test point

90 °C

Measured on tc point indicated on the product label.

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-20…80 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

50000 h

At maximum Tc = 90°C / 10% failure rate

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Suitable for through-wiring

No

Number of channels

1

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

ENEC 05 / CCC / CE / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Protection class

1/2

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

01-12-2023

Primary Article Identifier

4062172013420

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

abbe2869-9a91-4476-87e6-342c6ffd9e93

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172013420 UNV

Unpacked

1
4062172013437 VS

Shipping box

20 187mm x 186mm x 64mm 1980.00g 2.23dm³

Downloads

Information about Family

Extra small high-quality solution for multiple applications.

A great flexibility at luminaire design is given due to the extra small dimensions thereby the device is suitable for compact luminaires. In addition the product offers a wide operating window 8W-28W and 90 mA – 900 mA as well as an easy current setting via DIP-switches.
Product family features
  • Supply voltage: 220…240 V
  • Line frequency: 50 Hz | 60 Hz
  • Line voltage: 198…264 V
  • According to EN 61347-1, 61347-2-13, 62384
  • RI suppression according to CISPR 15
  • Line harmonics according to IEC 61000-3-2
  • Immunity according to IEC 61547
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 8/220…240/180 CS S MINI
30…42 V 90/120/150/180 mA 87.0 mm 30.0 mm 20.0 mm
OT FIT 8/220…240/180 CS I MINI
30…42 V 90/120/150/180 mA 104.0 mm 30.0 mm 26.0 mm
OT FIT 15/220-240/350 CS S MINI
30…42 V 225/250/325/350 mA 87.0 mm 35.0 mm 22.0 mm
OT FIT 20/220-240/500 CS S MINI
30…42 V 400/450/475/500 mA 87.0 mm 35.0 mm 22.0 mm
OT FIT 30/220-240/700 CS S MINI
30…42 V 550/600/650/700 mA 87.0 mm 35.0 mm 22.0 mm
OT FIT 38/220-240/900 CS S MINI
30…42 V 800/850/875/900 mA 87.0 mm 35.0 mm 22.0 mm