OT FIT 55/220…240/1A0 CS L G2

Product family benefits
  • Flexible current setting (DIPswitch – 4 currents)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High efficiency
  • High quality of light thanks to low output ripple current
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Permitted voltage range

Input voltage DC

176…276 V

Current set

DipSwitch

Total harmonic distortion

< 10 %

Power factor λ

0.87C...0.98

Device power loss

7.0 W

Inrush current

20 A

Max. ECG no. on circuit breaker 10 A (B)

16

Max. ECG no. on circuit breaker 16 A (B)

25

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

27…51 V

U-OUT (working voltage)

< 60 V

Nominal output current

800 / 900 / 975 / 1050 mA

Output current tolerance

±7.5 %

Output ripple current (100 Hz)

< 5 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

21.6…53.6 W

Galvanic isolation

SELV

Default output current

1000 mA

Galvanic isolation primary/secondary

-

Protective conductor current

2.0 mA

Dimensions & weight

Mounting hole spacing, length

270.0 mm

Product weight

217.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.5…9.5 mm

Wire preparation length, output side

8.5…9.5 mm

Width

30.0 mm

Height

21.0 mm

Length

280.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

80 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Non-reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

Type of connection, output side

Push terminal

Number of channels

1

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

CE / EL / ENEC 05 / EAC / CCC / RCM / BIS

Standards

Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 62384/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 61547

Protection class

I

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

08-12-2023

Primary Article Identifier

4052899522558

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

07f8e836-8454-4b16-8f39-d240678760bf

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899522558 UNV

Unpacked

1 280mm x 30mm x 21mm 217.00g 0.18dm³
4052899522565 VS

Shipping box

20 303mm x 159mm x 101mm 4659.00g 4.87dm³

Downloads

Information about Family

De-risk your business - easy, wide range of usage, flexible

Some benefits of this product are its efficiency which goes up to 90%, its long lifetime and guarantee. It is also flexible in its current setting thanks to 4 DIPSwitches and due to a low ripple the lighting quality is improved. This device is also suitable for emergency lighting units.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
OT FIT 35/220…240/700 CS L G2
27…51 V 500 / 600 / 650 / 700 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 55/220…240/1A0 CS L G2
27…51 V 800 / 900 / 975 / 1050 mA 280.0 mm 30.0 mm 21.0 mm
OT FIT 75/220…240/1A4 CS L G2
27…51 V 1100 / 1200 / 1300 / 1400 mA 360.0 mm 30.0 mm 21.0 mm