ETi DALI 75/220...240/500 D LT2 L

Product family benefits
  • Versatile non-isolated DALI driver up to 75 W due to flexible output characteristic
  • Fully programmable via software (DALI Interface)
  • Flexible current setting (RSet)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 10…100 % by amplitude dimming
  • No TouchDIM nor Corridor Function
  • High quality of light thanks to <4% output ripple current
  • High efficiency
  • Low standby power consumption: < 0.25 W
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear and area lighting
  • Industry lighting
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / Rset / Programmable

Total harmonic distortion

< 10 %

Power factor λ


Efficiency in full-load

94 %

at 230 V, 50 Hz

Device power loss

6.0 W

Inrush current

≤ 34 A

Max. ECG no. on circuit breaker 10 A (C)


Max. ECG no. on circuit breaker 10 A (B)


Max. ECG no. on circuit breaker 16 A (B)


Max. ECG no. on circuit breaker 16 A (C)


Max. ECG no. on circuit breaker 25 A (B)


Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

54…240 V

U-OUT (working voltage)

< 250 V

Nominal output current

125...500 mA

Output current LEDset open

60 mA

Output current LEDset shorted

125 mA

Default output current

60 mA

LEDset deactivated

Output current tolerance

±5 %

Output ripple current (100 Hz)

< 4 %

Output PSTLM


Output SVM


Nominal output power

8.0…75 W

Maximum output power

75 W

Galvanic isolation

Non isolated

Power loss in stand-by mode

<0.25 W

Dimensions & weight

Mounting hole spacing, length

270.0 mm

Product weight

205.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm


280.0 mm


21.0 mm


30.0 mm

Colors & materials

Casing material


Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %


ECG lifetime

50000 / 100000 h


Programming interface




Dimming interface


Dimming range

10…100 %

Dimming method

Full analogue dimming

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof


Intended for no-load operation


Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class


Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Constant lumen function


Number of channels


DALI-2 Energy Data


DALI-2 Diagnostic Data



Programming device

DALI magic

Tuner4TRONIC Field App


Programmable features

DALI-2 Luminaire Data


Certificates & standards

Approval marks – approval

CE / EL / ENEC 05 / EAC / CCC / BIS / RCM


Acc. to IEC 61347/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection


Logistical data

Commodity code


Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration


Primary Article Identifier


Candidate List Substance 1


CAS No. of substance 1


Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database


Packaging information




Dimension l x w x h



4062172053327 UNV


1 280mm x 30mm x 21mm 205.00g 0.18dm³
4062172053334 VS

Shipping box

20 303mm x 159mm x 105mm 4227.00g 5.06dm³


Information about Family

Optimized price/feature ratio – Good dimming performance for budget pricing

A 10…100% amplitude for dimming (1…10% electable by Tuner4TRONIC), flexible current setting by RSet and full DALI 2 compliance for budget pricing mark some highlights of this ICUTRONIC Intelligent driver. It also comes with a wide operating window of up to 500 mA and high efficiency of up to 93%.
Product family features
  • Line frequency: 0 Hz | 50 Hz | 60 Hz
  • Versatile scope of application due to output power range of up to 75 W
  • Supply voltage: 220…240 V
  • Available with output current range: up to 500 mA
  • Non-isolated drivers
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.


Sort by:
Nominal output voltage
Nominal output current
Data sheet
ETi DALI 25/220...240/300 D LT2 L
54…240 V 35…300 mA 280.0 mm 30.0 mm 21.0 mm
ETi DALI 35/220...240/400 D LT2 L
54…240 V 75…400 mA 280.0 mm 30.0 mm 21.0 mm
ETi DALI 75/220...240/500 D LT2 L
54…240 V 125...500 mA 280.0 mm 30.0 mm 21.0 mm