ETi DALI 35/220…240/700 LT2 L

Product family benefits
  • Versatile SELV DALI driver up to 75 W due to flexible output characteristic
  • Fully programmable via software (DALI Interface)
  • Flexible current setting (RSet)
  • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
  • High-quality dimming of 10…100 % by amplitude dimming
  • No TouchDIM nor Corridor Function
  • High quality of light thanks to <3% output ripple current
  • High efficiency
  • Low standby consumption ≤ 0.5 W
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application
  • Linear and area lighting
  • Linear lighting for office, education, industry, storage areas and retail
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J, except those used in high-risk task areas, i.e. those systems must not be used in workplaces where operators and other occupants of the premises are involved in potentially dangerous processes or situations.
  • Suitable for luminaires of protection class I
German innovation awards 2019 winner

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

0/50/60 Hz

Input voltage AC

198…264 V

Input voltage DC

176…276 V

Current set

DALI / Rset / Programmable

Total harmonic distortion

< 20 %

Power factor λ

0.83C…0.97

Efficiency in full-load

86 %

at 230 V, 50 Hz

Device power loss

4.0 W

Inrush current

≤ 10 A

Max. ECG no. on circuit breaker 10 A (B)

21

Max. ECG no. on circuit breaker 10 A (C)

-

Max. ECG no. on circuit breaker 16 A (C)

-

Max. ECG no. on circuit breaker 16 A (B)

35

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

20…51 V

U-OUT (working voltage)

< 60 V

Nominal output current

350…700 mA

Default output current

350 mA

Output current tolerance

±7 %

Output ripple current (100 Hz)

< 3 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

7.0…35.7 W

Maximum output power

35.7 W

Galvanic isolation

SELV

Power loss in stand-by mode

<0.5 W

Networked standby power

<0.50 W

at 230 V, 50 Hz

Dimensions & weight

Mounting hole spacing, length

270.0 mm

Product weight

170.00 g

Cable cross-section, input side

0.5…1.5 mm²

Cable cross-section, output side

0.5…1.5 mm²

Wire preparation length, input side

8.0…9.0 mm

Wire preparation length, output side

8.0…9.0 mm

Length

280.0 mm

Height

21.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…+85 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

100000 / 50000 h

At maximum Tc = 65°C / 10% failure rate / At maximum Tc = 75°C / 10% failure rate

Capabilities

Programming interface

Rset

Dimmable

Yes

Dimming interface

DALI-2

Dimming range

10…100 %

Dimming method

Full analogue dimming

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Suitable for emergency lighting

Yes

except those used in high-risk task areas

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Constant lumen function

Programmable

Control interface

DALI

DALI-2 Energy Data

No

DALI-2 Diagnostic Data

No

Number of channels

1

Programming

Programming device

DALI magic

Tuner4TRONIC Field App

Yes

Programmable features

DALI-2 Luminaire Data

No

Certificates & standards

Approval marks – approval

CE / ENEC 05 / EL / EAC / CCC / BIS / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 62386/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

20-11-2023

Primary Article Identifier

4062172126236

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

0101277a-569a-4c81-9325-3b7b64ccef03

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172126236 UNV

Unpacked

1 280mm x 30mm x 21mm 170.00g 0.18dm³
4062172126243 VS

Shipping box

20 303mm x 159mm x 105mm 3527.00g 5.06dm³

Downloads

Information about Family

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
ETi DALI 25/220...240/500 LT2 L
20…51 V 180...500 mA 280.0 mm 30.0 mm 21.0 mm
ETi DALI 35/220…240/700 LT2 L
20…51 V 350…700 mA 280.0 mm 30.0 mm 21.0 mm
ETi DALI 75/220...240/1A4 LT2 L
20…51 V 600…1400 mA 280.0 mm 30.0 mm 21.0 mm