IT FIT 75/220...240/550 CS D L

Product family benefits
  • Flexible with 1 driver offers 4 output currents
  • High quality light with very low ripple
  • Very high efficiency
  • Enable slim fixture design with flat 21 mm height metal housing
  • Long lasting and high reliability
  • Non-isolated driver
Areas of application
  • Linear and area lighting
  • Office, industrial and shop lighting

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Current set

DipSwitch

Power factor λ

0.94C…0.98

Full load at 220…240 VAC/50 Hz

Efficiency in full-load

93 %

at 230 V, 50 Hz

Device power loss

5.63 W

Inrush current

30.9 A

twidth = 220 µs typical (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

12

Max. ECG no. on circuit breaker 10 A (C)

19

Max. ECG no. on circuit breaker 16 A (B)

19

Max. ECG no. on circuit breaker 16 A (C)

30

Max. ECG no. on circuit breaker 25 A (B)

-

Surge capability (L/N-Ground)

2 kV

L/N – PE acc to EN 61547 Cluase 5.7

Surge capability (L-N)

1 kV

L/N

Nominal output voltage

90…216 V

At 350 mA output

Nominal output current

350 / 400 / 500 / 550 mA

±5%

Output ripple current (100 Hz)

< 5 %

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

31.5…75 W

Maximum output power

75 W

U-OUT (working voltage)

250 V

Total harmonic distortion

< 15 %

At full load

Default output current

550 mA

Dimensions & weight

Mounting hole spacing, length

200.0 mm

Product weight

129.00 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid/ Flexible Leads

Cable cross-section, output side

0.5…1.5 mm²

Solid/ Flexible Leads

Wire preparation length, input side

7…8 mm

Wire preparation length, output side

7…8 mm

Width

30.0 mm

Length

210.0 mm

Height

21.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-25…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…80 °C

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 / 100000 h

At maximum Tc = 70°C / 10% failure rate

Additional product data

Encapsulated

No

Predecessor EAN

4052899617414

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Control interface

-

Detection angle (Light sensor)

-

Number of channels

1

Detection angle (PIR)

-

Programming

Tuner4TRONIC

No

Tuner4TRONIC Field App

No

Box programming

No

Certificates & standards

Approval marks – approval

CE / ENEC / CCC / RCM / BIS / EAC / UKCA / TISI

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/Acc. to IEC 6100-4-5

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

29-11-2023

Primary Article Identifier

4062172212786

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

1acd9815-8ee5-447f-acaf-64a04b02553d

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172212786 UNV

Unpacked

1 210mm x 30mm x 21mm 129.00g 0.13dm³
4062172212793 VS

Shipping box

20 237mm x 162mm x 130mm 2889.00g 4.99dm³

Downloads

Information about Family

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
IT FIT 18/220...240/350 CS D L
23…54 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 40/220...240/350 CS D L
40…120 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 60/220...240/350 CS D L
90…175 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
IT FIT 75/220...240/550 CS D L
90…216 V 350 / 400 / 500 / 550 mA 210.0 mm 30.0 mm 21.0 mm