IT FIT 20/220...240/500 CS I

Product family benefits
  • Higher quality of light thanks to low output ripple current
  • High flexibility due to eight different output currents
  • Small housing for flexible luminaire designs
  • High efficiency
  • Long lasting and high reliability
  • Safety ensured by OSRAM (SELV)
Areas of application
  • Suitable for downlights, spotlights and LED panels
  • Suitable for indoor SELV installations
  • Installation and independent mounting via Cable Clamp Kit possible
German innovation awards 2019 winner 540301_SELV, short circuit proof

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Permitted voltage range

Total harmonic distortion

< 10 %

At full load, 230 V, 50 Hz / see graphs

Power factor λ

0.65C...0.98

Full load at 230 V/50 Hz

Efficiency in full-load

87 %

at 230 V, 50 Hz

Device power loss

3.1 W

At 230 V, Input power 24.1 W max.

Protective conductor current

<0.7 mA

Inrush current

18 A

twidth = 134 µs typical (measured at 50 % I peak)

Max. ECG no. on circuit breaker 10 A (B)

21

Max. ECG no. on circuit breaker 10 A (C)

35

Max. ECG no. on circuit breaker 16 A (B)

33

Max. ECG no. on circuit breaker 16 A (C)

56

Surge capability (L/N-Ground)

2 kV

L/N – PE acc to EN 61547 Cluase 5.7

Surge capability (L-N)

1 kV

L/N

Nominal output voltage

23…42 V

U-OUT (working voltage)

60 V

Nominal output current

150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 mA

±7.5% / ±5%

Output current tolerance

±5 %

Output ripple current (100 Hz)

< 3 %

Ripple average at 100 Hz

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

3.45…21 W

Maximum output power

21 W

Galvanic isolation primary/secondary

SELV

Default output current

500 mA

Galvanic isolation

SELV

Current set

DipSwitch

Dimensions & weight

Mounting hole spacing, length

108.0 mm

Product weight

120.00 g

Cable cross-section, input side

0.75…1.5 mm²

Cable cross-section, output side

0.75…1.5 mm²

Wire preparation length, input side

7…8 mm

Wire preparation length, output side

7…8 mm

Height

28.0 mm

Width

43.0 mm

Length

145.0 mm

Colors & materials

Casing material

Plastic

Temperatures & operating conditions

Ambient temperature range

-20…+45 °C

Maximum temperature at tc test point

70 °C

Measured on tc point indicated on the product label.

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-20…80 °C

Cool down before operating

Permitted rel. humidity during operation

5…85 %

Maximum 56 days/year at 85 %

Lifespan

ECG lifetime

50000 h

At maximum Tc = 70°C / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I / II

Type of connection, input side

Push terminal

Type of connection, output side

Push terminal

Suitable for through-wiring

No

Number of channels

1

Programming interface

Dipswitch

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

CE / CCC / RCM / UKCA / ENEC 25

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Protection class

II

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

16-08-2023

Primary Article Identifier

4062172326285

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

a168e0d1-cfc2-4223-9a2d-9f73be573c61

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172326285 UNV

Unpacked

1 145mm x 43mm x 28mm 120.00g 0.17dm³
4062172326292 VS

Shipping box

50 310mm x 225mm x 170mm 6388.00g 11.86dm³

Downloads

Information about Family

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
IT FIT 20/220…240/500 CS
23…42 V 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 mA 97.0 mm 43.0 mm 29.5 mm
IT FIT 30/220…240/700 CS
23…42 V 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA 97.0 mm 43.0 mm 29.5 mm
IT FIT 40/220…240/1A0 CS
23…42 V 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA 97.0 mm 43.0 mm 29.5 mm
IT FIT 20/220...240/500 CS I
23…42 V 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 mA 145.0 mm 43.0 mm 28.0 mm
IT FIT 30/220...240/700 CS I
23…42 V 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA 145.0 mm 43.0 mm 28.0 mm
IT FIT 40/220...240/1A0 CS I
23…42 V 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA 145.0 mm 43.0 mm 28.0 mm