ELEMENT 18/220…240/350 D CS L

Product family benefits
  • Flexible current setting (DIPswitch – 4 currents)
  • Small housing for flexible luminaire designs
  • High efficiency (up to 94%)
  • Enhanced safety due to overload, overtemperature, short-circuit protection
Areas of application
  • Linear lighting for office, school and public areas
  • Suitable for luminaires of protection class I

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Current set

DipSwitch

Power factor λ

0.95

Full load at 230 V/50 Hz

Efficiency in full-load

88 %

at 230 V, 50 Hz

Device power loss

2.4 W

At 230 V, Input power 20.9 W max.

Inrush current

8.6 A

twidth = 126 μs typical (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

40

Max. ECG no. on circuit breaker 10 A (C)

70

Max. ECG no. on circuit breaker 16 A (B)

70

Max. ECG no. on circuit breaker 16 A (C)

116

Surge capability (L/N-Ground)

2 kV

Surge capability (L-N)

1 kV

Nominal output voltage

25…54 V

Nominal output current

200 / 250 / 300 / 350 mA

±5%

Output ripple current (100 Hz)

< 30 %

Output PSTLM

≤1

Output SVM

≤1.2

Nominal output power

5…18 W

Maximum output power

18 W

Default output current

350 mA

Galvanic isolation

Non isolated

U-OUT (working voltage)

< 250 V

Total harmonic distortion

< 20 %

Output current tolerance

±7.5 %

Dimensions & weight

Mounting hole spacing, length

200.0 mm

Product weight

102.00 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid or flexible leads

Cable cross-section, output side

0.5…1.5 / 0.75…1.5 mm²

Solid or flexible leads

Wire preparation length, input side

8.5…9.5 mm

Width

30.0 mm

Wire preparation length, output side

8.5…9.5 mm

Height

21.0 mm

Length

210.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-25…85 °C

Permitted rel. humidity during operation

5…85 %

Non-condensing

Lifespan

ECG lifetime

35000 / 50000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Temperature at the measuring point tc (°C)

75 °C

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Number of channels

1

Programming

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

CE / ENEC 05 / EAC / CCC / BIS / RCM

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

21-07-2023

Primary Article Identifier

4052899553071

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

632bbc3b-6e47-4428-bcfe-ac098a7e3fce

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4052899553071 UNV

Unpacked

1
4052899553088 VS

Shipping box

20 228mm x 138mm x 160mm 2318.00g 5.03dm³

Downloads

Information about Family

Perfect price/feature ratio - standard lighting needs for basic pricing.

The ELEMENT non SELV driver comes in small housing of only 210 mm and offers a high efficiency of up to 93% and flexibility in current setting by DIPSwitch (4). It is the optimized price/performance driver solution.
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
ELEMENT 18/220…240/350 D CS L
25…54 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
ELEMENT 40/220…240/350 D CS L
55…120 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
ELEMENT 60/220…240/350 D CS L
90…175 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm