Element LD 60/220…240/1A4
Product family benefits
- Compatible with LEDs with Chip-On-Board technology and discrete LEDs
- High efficiency
- Simple installation and wiring
Areas of application
- Spotlight and downlight installations for shops
- Recessed luminaires
- Suitable for luminaires of protection classes I and II
- Suitable for indoor SELV installations
Technical Data
Electrical data
Nominal input voltage
220…240 V
Mains frequency
50/60 Hz
Input voltage AC
220…240 V
Total harmonic distortion
< 10 %
Power factor λ
0.98
Efficiency in full-load
> 90 %
Device power loss
8.8 W
Inrush current
< 16 A
Max. ECG no. on circuit breaker 10 A (B)
13
Max. ECG no. on circuit breaker 16 A (B)
20
Max. ECG no. on circuit breaker 25 A (B)
-
Surge capability (L/N-Ground)
1 kV
Surge capability (L-N)
1 kV
Nominal output voltage
21…42 V
U-OUT (working voltage)
60 V
Nominal output current
1400 mA
Output current tolerance
±10 %
Output ripple current (100 Hz)
15 %
Output PSTLM
≤1
Output SVM
≤0.4
Nominal output power
60 W
Maximum output power
60 W
Galvanic isolation
SELV
Galvanic isolation primary/secondary
SELV
Current set
Fixed current
Dimensions & weight
Mounting hole spacing, length
99.0 mm
Mounting hole spacing, width
64.0 mm
Product weight
185.00 g
Cable cross-section, input side
0.5…1.5 mm²
Cable cross-section, output side
0.5…1.5 mm²
Wire preparation length, input side
8.0…9.0 mm
Wire preparation length, output side
8.0…9.0 mm
Length
110.0 mm
Height
29.5 mm
Width
75.0 mm
Colors & materials
Casing material
Plastic
Temperatures & operating conditions
Ambient temperature range
-10…+45 °C
Maximum temperature at tc test point
85 °C
Max.housing temperature in case of fault
110 °C
Temperature range at storage
-10…85 °C
Permitted rel. humidity during operation
5…85 %
Lifespan
ECG lifetime
30000 h
ECG ambient temperature (ta) |
45 °C |
|---|---|
Temperature at the measuring point tc (°C) |
85 °C |
ECG lifespan (h) |
30000 h |
Capabilities
Dimmable
No
Overheating protection
Automatic switch off, reversible by manual mains reset
Overload protection
Automatic switch off, reversible by manual mains reset
Short-circuit protection
Automatic reversible
No-load proof
Yes
Intended for no-load operation
No
Max. cable length to lamp/LED module
2.0 m
Suitable for fixtures with prot. class
I / II
Type of connection, output side
Push terminal
Suitable for through-wiring
No
Certificates & standards
Approval marks – approval
CCC / CE / ENEC 10 / RCM
Standards
Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to CISPR 15/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class
II
Type of protection
IP20
Logistical data
Commodity code
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4052899947139
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
92651546-abe2-43a3-b516-15166bf8b521
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4052899947139 |
UNV
| 1 | 110mm x 75mm x 30mm | 3700.00g | 0.24dm³ |
| 4052899947207 |
VS
| 20 | 387mm x 229mm x 80mm | 4071.00g | 7.09dm³ |
Downloads
Data sheets
Information about Family
Compact SELV drivers with fixed current output.
The integrated cable clamp provides a solution for built-in and independent installations and contributes to the simplicity of installing and operating this compact driver. Due to the availability in many wattages the devices is able to meet various needs.
The integrated cable clamp provides a solution for built-in and independent installations and contributes to the simplicity of installing and operating this compact driver. Due to the availability in many wattages the devices is able to meet various needs.
Product family features
- Available with wattages up to 60 W
- Constant output current
- Integrated cable clamp for luminaire and independent installation
- Operated with Safety extra-low voltage (SELV): < 60 V
- Reversible overtemperature, overload, short-circuit and open-circuit protection
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
|
Element LD 60/220…240/1A4
|
21…42 V | 1400 mA | 110.0 mm | 75.0 mm | 29.5 mm |