EM FIT 75/220...240/1A6 CS L

Product family benefits
  • Small housing design
  • Flexible current setting (DIPswitch – 4 currents)
  • Enhanced safety due to overload, overtemperature, short-circuit protection
  • High efficiency
  • Long lasting and high reliability
  • High light quality due to low ripple current
Areas of application
  • Linear and area lighting
  • Shop lighting
  • Industry lighting
  • Offices, Public buildings, Supermarkets
  • Suitable for luminaires of protection class I and II

Technical Data

Electrical data

Nominal input voltage

220…240 V

Mains frequency

50/60 Hz

Input voltage AC

198…264 V

Current set

DipSwitch

Power factor λ

0.95

Half load at 230 V/50 Hz

Efficiency in full-load

89 %

at 230 V, 50 Hz

Device power loss

9.7 W

At 230 V

Inrush current

60 A

twidth = 190 µs typical (measured at 50 % Ipeak)

Max. ECG no. on circuit breaker 10 A (B)

7

Max. ECG no. on circuit breaker 10 A (C)

12

Max. ECG no. on circuit breaker 16 A (B)

12

Max. ECG no. on circuit breaker 16 A (C)

20

Max. ECG no. on circuit breaker 25 A (B)

18

Max. ECG no. on circuit breaker 25 A (C)

31

Surge capability (L/N-Ground)

2 kV

L/N – PE acc to EN 61547 Cluase 5.7

Surge capability (L-N)

1 kV

Nominal output voltage

27...51 V

At 1300/1400/1500/1600 mA output current

Nominal output current

1300 / 1400 / 1500 / 1600 mA

±7.5%

Output PSTLM

≤1

Output SVM

≤0.4

Nominal output power

35.1…81.6 W

Maximum output power

81.6 W

Output current tolerance

±7.5 %

Galvanic isolation

SELV

Total harmonic distortion

< 20 %

At full load, 230 V, 50 Hz / see graphs

Output ripple current (100 Hz)

< 10 %

Ripple average at 100 Hz

U-OUT (working voltage)

< 60 V

Dimensions & weight

Mounting hole spacing, length

270.0 mm

Product weight

210.00 g

Cable cross-section, input side

0.5…1.5 / 0.75…1.5 mm²

Solid or flexible leads

Cable cross-section, output side

0.5…1.5 / 0.75…1.5 mm²

Solid or flexible leads

Wire preparation length, input side

7…8 mm

Length

280.0 mm

Wire preparation length, output side

7…8 mm

Height

21.0 mm

Width

30.0 mm

Colors & materials

Casing material

Metal

Temperatures & operating conditions

Ambient temperature range

-20…+50 °C

Maximum temperature at tc test point

75 °C

Max.housing temperature in case of fault

110 °C

Temperature range at storage

-40…85 °C

Permitted rel. humidity during operation

5…90 %

Non-condensing

Lifespan

ECG lifetime

35000 / 50000 h

At maximum Tc = 75°C / 10% failure rate / At maximum Tc = 65°C / 10% failure rate

Additional product data

Encapsulated

No

Capabilities

Dimmable

No

Overheating protection

Automatic reversible

Overload protection

Automatic reversible

Short-circuit protection

Automatic reversible

No-load proof

Yes

Intended for no-load operation

No

Max. cable length to lamp/LED module

2.0 m

Output wires must be routed as close as possible to each other

Suitable for fixtures with prot. class

I

Number of channels

1

Programming

Box programming

No

Tuner4TRONIC

No

Tuner4TRONIC Field App

No

Programming device

DIPswitch

Certificates & standards

Approval marks – approval

CE / CCC / ENEC / RCM / EAC / UKCA

Standards

Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 61547/CISPR 15/EN 55015

Type of protection

IP20

Logistical data

Commodity code

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

19-05-2023

Primary Article Identifier

4062172220033

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

39ca20a0-60fd-4c7b-8120-5af2ddea52d9

Packaging information

EAN

Unit

Piece

Dimension l x w x h

Weight

Volume

4062172220033 UNV

Unpacked

1 280mm x 30mm x 21mm 210.00g 0.18dm³
4062172220040 VS

Shipping box

20 375mm x 320mm x 75mm 4779.00g 9.00dm³

Downloads

Information about Family

Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Products

Sort by:
Product
Nominal output voltage
Nominal output current
Length
Width
Height
Data sheet
EM FIT 18/220...240/350 CS L
27...51 V 200 / 250 / 300 / 350 mA 210.0 mm 30.0 mm 21.0 mm
EM FIT 40/220...240/800 CS L
27…51 V 500 / 600 / 700 / 800 mA 210.0 mm 30.0 mm 21.0 mm
EM FIT 60/220...240/1A2 CS L
27…51 V 900 / 1050 / 1100 / 1200 mA 280.0 mm 30.0 mm 21.0 mm
EM FIT 75/220...240/1A6 CS L
27...51 V 1300 / 1400 / 1500 / 1600 mA 280.0 mm 30.0 mm 21.0 mm