QBM DALI EL-T CONV
- Easy to integrate in luminaire
- Allow the easy upgrade of a DALI-2 luminaire for qualified Bluetooth mesh
- Allow an easy integration of any DALI-2 Sensor in a qualified Bluetooth mesh network
- External push button support for floor standing luminaires
- Secured product communication granted by ioXT and PSA Certificates
- Open offices
- Individual offices
- Conference rooms
- Classrooms
- Storage and break areas
- Stairways
- Toilets
- Ceiling or independent installation via ECO CI KIT possible
Technical Data
Electrical data
Nominal voltage
220…240 V
Mains frequency
50/60 Hz
Radio frequency
2.4 GHz
Maximum TX power
+4 dBm
Wireless protocol
Qualified Bluetooth mesh enabled by Silvair
Wireless range
10 m line of sight
Guaranteed supply current (DALI)
82 mA
Maximum supply current (DALI)
250 mA
System wattage
1.90 W
Standby power
< 0.5 W
Dimensions & weight
Length
108.0 mm
Width
30.0 mm
Height
21.0 mm
Product weight
44.00 g
Wire preparation length, input side
8.0…9.0 mm
Cable cross-section, input side
0.5…1.5 mm²
Wire preparation length, output side
8.0…9.0 mm
Cable cross-section, output side
0.5…1.5 mm²
Temperatures & operating conditions
Ambient temperature range
-20…+60 °C
Permitted rel. humidity during operation
0…85 %
Temperature range at storage
0…60 °C
Permitted relative humidity at storage
0…85 %
Maximum temperature at tc test point
70 °C
Lifespan
Lifespan
50000 h
Capabilities
Control interface
qualified Bluetooth mesh
Control output
yes
Number of control outputs
1
Number of connected drivers
32
Dimmable
Yes
Type of installation
Luminaire integration
Compatibility
Works with OSRAM HubSense
Status Indicator
Blue: Network status
Reset
Manual
Number of supported push buttons
-
Dimming interface
DALI-2
Detection angle (Light sensor)
-
Detection angle (PIR)
-
Certificates & standards
Approval marks – approval
CE / DALI-2 / ioXT / PSA
Type of protection
IP20
Standards
Acc. to EN 55015 / Acc. to EN 61347-1 / Acc. to EN 61347-2-11 / Acc. to EN 61547 / Acc. to EN 62479 / Acc. to ETSI EN 300 328 / Acc. to ETSI EN 301 489-17 / Acc. to ETSI EN 301 489 - 1
Logistical data
Commodity code
85371098990
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
30-06-2023
Primary Article Identifier
4062172282482
Candidate List Substance 1
Lead titanium zirconium oxide
CAS No. of substance 1
12626-81-2
Candidate List Substance 2
Lead
CAS No. of substance 2
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
c0597cbb-09ce-4318-8fdd-d7cc8e97b31b
Packaging information
EAN |
Unit |
Piece |
Dimension l x w x h |
Weight |
Volume |
|---|---|---|---|---|---|
| 4062172282482 |
UNV
| 1 | 108mm x 30mm x 21mm | 44.00g | 0.07dm³ |
| 4062172282499 |
VS
| 25 | 160mm x 120mm x 117mm | 1150.00g | 2.25dm³ |
Downloads
Information about Family
- Qualified Bluetooth mesh enabled by Silvair
- Works with OSRAM Hubsense
- Suitable for up to 32 DALI-2 LED drivers (Part - 207) in broadcast mode
- Suitable for up to 1 DALI sensor
- Compact size: 108 x 30 x 21 mm
- Push terminals for easy wiring
Products
| Product |
|
|
|
|
|
Data sheet | ||
|---|---|---|---|---|---|---|---|---|
|
QBM DALI CONV LI
|
30-06-2023 | 220…240 V | 4062172117388 | Lead | 7439-92-1 | ||
|
|
QBM DALI EL-T CONV
|
30-06-2023 | 220…240 V | 4062172282482 | Lead titanium zirconium oxide | 12626-81-2 |